• Refine By >
    • 286 products from 11 stores for

      dc motor speed control

  • departments

  • Show Only

  • prices

  • Colors

    Filter by color:
    Adjust your color:
  • stores

    • More ...
  • marketplaces

  • brands

    • More ...
  • payment types

  • certifications

  • DC 6V-40V / 3.3 A Motor Speed Control Controller Regulator

    DC 6V-40V / 3.3 A Motor Speed Control Controller Regulator DC 6V-40V / 3.3 A Motor Speed Control Controller Regulator Reviews : Product Details Multi -faceted core module heat sink , cooling effect is good. 8.5mm barrier terminal blocks, can pass through heavy current. Double panel PCB, 1.6mm thick, A grade material . Description : Multi -faceted core module heat sink , cooling effect is good 8.5mm barrier terminal blocks, can pass through heavy current Double panel PCB, 1.6mm thick, A grade material.

    Highlights:

  • 6V-90V 15A Pulse Width PWM DC Motor Speed Controller Switch

    6V-90V 15A Pulse Width PWM DC Motor Speed Controller Switch 6V-90V 15A Pulse Width PWM DC Motor Speed Controller Switch Reviews : Product Details Features : This motor speed control switch can control the motor speed from between 0% -100% It's been widely used in industrial production Comes with a knob to control the speed of the motor Easy to use Working Voltage: DC 6V-DC 90V Controlled Power: 0.01-1000W Max 15A Quiescent Current: 0.005A (standby) PWM Duty Cycle: 0% -100% PWM Frequency: 15KHZ Control

    Highlights:

  • Pro-Ject Speedbox S Electronic Motor Control Black

    The Quartz-controlled oscillator of the Pro-Ject Speed Box S generates clean DC-power without mains distortion. Power outputs are galvanically decoupled from the input current. Many turntables in the current market (including all Pro-Ject models) use DC synchronous motors, and the Speed Box S can be used for ultimate speed consistency and electronic speed change between 33 and 45rpm with many such devices . PJT -SPEEDBOXSB Pro -Ject Speedbox S Electronic Motor Control Black PJT -SPEEDBOXSB Caution ! Do

    Highlights:

  • Pro-Ject Speedbox S Electronic Motor Control Silver

    The Quartz-controlled oscillator of the Pro-Ject Speed Box S generates clean DC-power without mains distortion. Power outputs are galvanically decoupled from the input current. Many turntables in the current market (including all Pro-Ject models) use DC synchronous motors, and the Speed Box S can be used for ultimate speed consistency and electronic speed change between 33 and 45rpm with many such devices . PJT -SPEEDBOXSS Pro -Ject Speedbox S Electronic Motor Control Silver PJT -SPEEDBOXSS The

    Highlights:

  • Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount Reviews

    Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount 9 hours 24 minutes These dual axis motor drives, designed for EQ3-2 mounts, are essential in long-explosure astrophotography. They precisely control the telescopes’ tracking speed to compensate for the earth's rotation during long exposure of celestial objects. Available in 2x, 4x, and 8x speeds through the Hand Controller. These DC motor drives run on 4 "D" cell batteries (not included). Motors for both axes, clutches, cables, hand controller, and

    Highlights:

  • 12V-40V 10A PWM DC Motor Speed Controller w/ Knob

    12V-40V 10A PWM DC Motor Speed Controller w/ Knob 12V-40V 10A PWM DC Motor Speed Controller w/ Knob Reviews : Product Details Features : Control the speed of a DC motor with this controller High efficiency, high torque, low heat generating With reverse polarity protection, high current protection Working Voltage: DC 12V - DC 40V Control Power: 0.01 - 400W Static Current: 0.02 A ( Standby ) PWM Duty Cycle: 10% -100% PWM Frequency: 13 KHz Size (L x W x H ): Approx. 73 x 60 x 27 mm Material: Plastic, metal

    Highlights:

  • Roboteq HDC2450 Brushed DC Motor Controller

    Roboteq HDC2450 Brushed DC Motor Controller Roboteq HDC2450 Brushed DC Motor Controller Product Code: HDC2450 Excl. VAT: £487.30 Incl. VAT : £584 .76 Roboteq ’s HDC2450 controller is designed to convert commands received from a RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. Dual Channel, 150A, 50V RS1-25 and RC5 cables not included but available seperately Roboteq 's HDC24xx controller is

    Highlights:

  • AMPLIFIER, FOR MOTORS, 10-50VDC, 5A

    AMPLIFIER, FOR MOTORS, 10-50VDC, 5A; Supply Voltage Min:10VDC; Supply Voltage Max:50VDC; Armature Current Max:5A; Armature Voltage Max:-; External Depth:24mm; External Length / Height:95mm; External Width:75mm; For Use With:EC Motors with Hall sensors; Motor Power:250W; Mounting Type:4 Screw Fixing; Operating Temperature Max:45°C; Operating Temperature Min:-10°C; Output Current Max:10A; Output Voltage Max:7VDC; Output Voltage Min:12VDC; Rotational Speed:120000rpm

    £163.50

    Highlights:

  • IC, PWM, FAN SPEED CNTRL, SD, 8-DIP

    IC, PWM, FAN SPEED CNTRL, SD, 8-DIP; Motor Type:DC Brushless; No. of Outputs:1; Output Current:5mA; Output Voltage:-; Driver Case Style:DIP; No. of Pins:8; Supply Voltage Min:3V; Supply Voltage Max:5.5V; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Base Number:649; Frequency:30Hz; Input Current:500µA; MSL:-; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (16-Dec-2013); Supply Voltage Range:3V to 5.5V

    Highlights:

  • Dcm-24-40 - Controller Dc Motor 8-24V 40A - United Automation

    CONTROLLER, DC MOTOR, 8-24V, 40A Supply Voltage Max: 24V Supply Voltage Min: 6V Approval Bodies: CE Current Limit Max: 40A Current Limit Min: 40A External Depth: 56mm External Length / Height: 26mm External Width: 43mm For Use With: Speed Control of Low Voltage, High Frequency, DC Motors, Lighting and Medium Frequency Heaters Input Current: 1mA Input Voltage Max: 24V Input Voltage Min: 8V Load Current: 40A Mounting Type: Screw Operating Temperature Max: 65 C Operating Temperature Min: 0 C Output Current

    £49.10
    • Free shipping

    Highlights:

  • Sabertooth Dual 12A Motor Driver

    Sabertooth Dual 12A Motor Driver Sabertooth Dual 12A Motor Driver Product Code: ST2X12 Excl. VAT: £59.31 Incl. VAT: £71.17 The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Input voltage: 6-24V nominal, 30V absolute max. Output Current: Up to 12A continuous per channel. Peak loads may be up to 25A per channel for a few seconds. These ratings are

    Highlights:

  • Dcm-24-40 - Controller Dc Motor 8-24V 40A - United Automation

    CONTROLLER, DC MOTOR, 8-24V, 40A Supply Voltage Max: 24V Supply Voltage Min: 6V Approval Bodies: CE Current Limit Max: 40A Current Limit Min: 40A External Depth: 56mm External Length / Height: 26mm External Width: 43mm For Use With: Speed Control of Low Voltage, High Frequency, DC Motors, Lighting and Medium Frequency Heaters Input Current: 1mA Input Voltage Max: 24V Input Voltage Min: 8V Load Current: 40A Mounting Type: Screw Operating Temperature Max: 65 C Operating Temperature Min: 0 C Output Current

    Highlights:

  • Axminster CNC Technology KX1S Mill

    Axminster CNC Technology KX1S Mill Axminster CNC Technology KX1S Mill Details Key Features Precision CNC Mill for education sector and advanced model engineering Ball screws driven by hybrid stepper motors on all three axis 500W brushless DC motor with belt drive to the spindle Full sheet steel enclosure with interlocked doors Options available including fourth axis rotary table and coolant system Windows based operating software and connection cable included Description The KX1S is a high precision CNC

    £4,799.94

    Highlights:

  • Vantage 3000 Easy Tube Load® Pump - Auto Control

    Features : Microprocessor controlled 24 hour duty with brushless dc motor Set precise dose requirement and calibrate to suit medium viscosity Stackable and multi channel head options Keypad operated with two line alpha numeric display Volt free contacts for external Start /Stop /Reverse Manual and analogue control of speed/flow rate Vantage 3000 Easy Tube Load® Pump - Auto Control The Vantage 3000 C is a manual/analogue control, easy tube load pump with stackable and multi channel pump head options and

    £1,458.74

    Highlights:

  • Trueshopping Professional Mig Welding Machine Gas / No Gas Combination 140 Amp with Accessory Kit

    Trueshopping Professional Mig Welding Machine Gas / No Gas Combination 140 Amp with Accessory Kit Same Day Despatch on orders before 4pm & Fast FREE Delivery Need to buy Welding Wire Separately ELECTRICAL CONNECTIONS WARNING : This machine MUST be earthed. This welder must be connected to a 230 V (50 Hz) supply, having a rated capacity of greater than 12 amps. A 13 amp (BS1363) plug is NOT supplied for this device. Connect the three core mains leads to a suitably fused supply through an isolator or heavy

    Highlights:

  • WARN M15000 24V CE Winch - 478022

    Shopping Cart WARN M15000 24V CE Winch - 478022 Enough capacity for the heaviest loads. A heavy-duty 15,000 lb. capacity winch with a 4.6hp series wound motor. Direct drive cone braking system. Control pack is designed for clearance and ease of access. Comes with 90' of 7/16" wire rope. High strength carrier plates are designed to handle heavy gear train stresses 24V DC PERFORMANCE SPECS Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current Pull by layer layer/Lbs(Kgs.) 0 28(8.6) 24 amps

    €3,529.63
    • Sale

    Highlights:

  • Motore in c.c. brushless Crouzet, 24V dc, 3250rpm, 80W

    Motore in c.c. brushless Crouzet, 24V dc, 3250rpm, 80W Disponibile dal 10 /12 /2014 494 -7060 Crouzet 80 080 005 Coppia in uscita massima 0,2 Nm 6 A Diametro asta 57mm 142 .5mm Potenza nominale 80 W 57mm 24 V c.c. Tipo di motore c .c . Brushless Velocità di uscita 3250 giri/min Motomate Direct Drive Motomate offers an all in one motion solution for quick, compact integration with minimal wiring. 80W brushless motors with an integrated 4 I/O logic controller Integral 4 quadrant variable speed drive

    €279.13

    Highlights:

  • Axminster CNC Technology KX3S Mill

    Details Key Features Precision CNC Mill for education sector, prototyping or small production Ball screws driven by hybrid stepper motors on all three axis 1,000W brushless DC motor with belt drive to the spindle Full sheet steel enclosure/stand with interlocked doors Options available including fourth axis rotary table, coolant system Windows based operating software and connection cable included Description The KX3S is a high precision CNC milling machine, the bigger brother of the KX1S. It is ideal for

    £7,349.94

    Highlights:

  • DC 12V-24V 3.2 A Motor Speed Control PWM Controller

    DC 12V-24V 3.2 A Motor Speed Control PWM Controller DC 12V-24V 3.2 A Motor Speed Control PWM Controller Reviews : Product Details Description : Voltage : 12V - 24V DC Current: 3.2 A Board Size: Approx. 2.4 x 1.7 inch (60 x 43 mm) Hole Diameter: Approx. 0.16 inch (4 mm) Hole Distance: Approx. 2.15 x 1.5 inch (53 ×36 mm) Cord Length: Approx. 7.1 inch (18 cm) 1 x Motor Speed Controller 14002447 .JPG - Customer Review joat2005 2012 -01 -17 02:14:55 Works nicely for driving Peltier devices. Only query is

    Highlights:

  • 20 kW/40kW AC Induction Higher Speed Motor

    : 20 kW/40kW AC Induction Higher Speed Motor Product 5/5 20 kW/40kW AC Induction Higher Speed Motor £3,450.00 Our largest three-phase AC induction motor is ideal for applications requiring greater torque and power such as vans and 4 x 4 vehicles. It is buit to order. When used in combination with our 650A controller 96V 650A AC Motor Controller Package (CR-CAC8496550) this motor is capable of providing toque suitable for vehilces from 1500 kg to well over 3500 kg depending on gear ratios available and

    Highlights:

  • Motor Driver 1A Dual TB6612FNG

    Motor Driver 1A Dual TB6612FNG Motor Driver 1A Dual TB6612FNG Product Code : ROB -09457 Excl . VAT: £5.56 Incl. VAT: £6.67 The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz.

    Highlights:

  • Masterflex L S compact low flow variable speed drive 12 VDC

    Masterflex L S compact low flow variable speed drive 12 VDC WZ -77200 -12 WZ -17050 -01 Masterflex L/S compact, low-flow, variable-speed drive, 12 VDC WZ -77200 -12 Compact drives are a perfect upgrade from a Masterflex Stackable , compact pump drive delivers versatile performance in limited space Flow rate: 2.1 to 560 mL/min; flow rate depends on drive rpm and tubing size. Stackable, compact drive measures 5-3/8"L x 5-3/16"W x 4-1/2"H perfect for small work areas. Painted steel housing is IP22 rated.

    Highlights:

  • Dc520 Drywall Screwdriver 18 Volt Bare Unit

    Dc520 Drywall Screwdriver 18 Volt Bare Unit DeWalt Cordless drywall Screwdriver with the following features : Removeable depth sensitive set and forget nosepiece for consistent fastener depth Two speed settings, variable speed and reverse switch for maximum user control Up to 20 Nm of sustainable torque for maximum performance High performance fan cooled motor with replaceable brushes for maximum power and durability Ergonomically -designed soft grip and trigger for added user comfort Electronic motor

    Highlights:

  • Dewalt Dc 759n 13mm 18 Volt Cordless Drill Driver (body Only)

    DeWalt DC 759N 13mm 18 Volt Cordless Drill Driver (BODY ONLY). Powerful 18 Volt drill driver for drilling and screwdriving applications. Compact, lightweight design. 17 position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes. Two speed settings, variable speed and reverse switch for controllable use. Ergonomically designed trigger and rubber grip. 13mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change with one

    £270.00
    • Free shipping

    Highlights:

  • DC520 Drywall Screwdriver 18 Volt Bare Unit

    DC520 Drywall Screwdriver 18 Volt Bare Unit DEWALT DC520 Drywall Cordless Screwdriver has a removable depth sensitive set and forget nose piece for consistent fastener depth. Two speed settings, variable speed and reverse switch for maximum user control. Up to 20 Nm of sustainable torque for maximum performance. The high performance fan cooled motor with replaceable brushes for maximum power and durability. Ergonomically -designed soft grip and trigger for added user comfort, and an electronic motor brake

    Highlights:

  • DeWalt DC520 Drywall Screwdriver 18 Volt Bare Unit

    DeWalt DC520 Drywall Cordless Screwdriver has a removeable depth sensitive set and forget nosepiece for consistent fastener depth. Two speed settings, variable speed and reverse switch for maximum user control. Up to 20 Nm of sustainable torque for maximum performance. The high performance fan cooled motor with replaceable brushes for maximum power and durability. Ergonomically -designed soft grip and trigger for added user comfort, and an electronic motor brake for added control. All metal gearing for

    Highlights:

  • DeWalt DC827N 18v Cordless Impact driver BODY ONLY. DC 827N

    DeWalt DC827N 18v Cordless Impact driver BODY ONLY. DC 827N DeWalt DC827N 18v Cordless Impact driver BODY ONLY. DC 827N £123.00 Ex. VAT £147.60 Inc. VAT List Price: £177.00 Ex. VAT £212.40 Inc. VAT Details Body only unit - Supplied WITHOUT battery or charger. Durable frameless high speed motor delivers up to 150 Nm of torque All metal gearing for efficient power transmission and long tool life Aluminium front housing provides greater heat dispersion increasing motor life Improved variable speed switch and

    Highlights:

  • DeWalt DC520 Drywall Screwdriver 18 Volt Bare Unit

    DEWALT DC520 Drywall Cordless Screwdriver has a removable depth sensitive set and forget nose piece for consistent fastener depth. Two speed settings, variable speed and reverse switch for maximum user control. Up to 20 Nm of sustainable torque for maximum performance. The high performance fan cooled motor with replaceable brushes for maximum power and durability. Ergonomically -designed soft grip and trigger for added user comfort, and an electronic motor brake for added control. All metal gearing for

    £185.98
    • Free shipping

    Highlights:

  • Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing

    / Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing PRODUCT ID: 918 Description Description - This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for most purposes 1/16 is a good enough

    Highlights:

  • Share:
  • About these links